[TheForge] brass

[Wayne Ackman]

Thanks Dan.

I thought I needed some very fine sandpaper, didn't know it was 
available at the auto parts store.  Ran down and got some and this 
works.  Appreciate the help

Wayne


Dan Scheid wrote:
> If you don't mine hand work then use sandpaper. Start with 150 grit and go
> to 1500 then hit it with a polisher. You can get up to 1500 wet sanding
> paper at an auto supplier in the paint department. If you want the quick
> dirty way use a dremal tool with SS buffing compound
> Dan Scheid
>   
.