[TheForge] drum opening tool

[David E. Smucker]

Bruce,  I bet I almost as fast taking the top out of a 5 gallon (or 55 
gallon) drum with a good sharp cold chisel and a hammer.  Try it -- you 
might be surprised.  Plasma torch is fast too but not everyone has one of 
these -- plus the issue of what was in the drum. -- Not that a cold chisel 
is risk free -- because it may not be spark free.  In college I worked in a 
small chemical plant that had once burned to the ground because a leaking 
drum of ether ran into a sump pump -- follow by an explosion when the pump 
came on.

Dave Smucker
----- Original Message ----- 
From: "Bruce Freeman" <FREEMAB at pt.fdah.com>
To: <theforge at mailman.qth.net>
Sent: Wednesday, May 09, 2007 9:04 AM
Subject: [TheForge] drum opening tool


Actually, that's a rather neat tool.  Like a big can opener.

I printed the picture from the patent (long since expired).  I may have use 
for one of these.  I can get 5 gal chemical containers free for the taking, 
and they'd make good gas forge bodies.  But cutting out the ends was an 
issue and this might be the solution.

Bruce
NJ

>>> regionalchaos at gmail.com 5/8/2007 7:31 PM >>>
Is this it?

http://www.google.com/patents?id=8KdpAAAAEBAJ&dq=2252406

It claims it is a drum opening tool.

Jim


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________