[TheForge] ranite hardfacing rods

[Mike Spencer]

> The really odd thing about this anvil is that the face is not
> parallel to the base so that when the anvil is sitting on a level
> surface, the horn-end of the face is a good 1/4 to 1/2 inch lower
> than the heal.

The technical term for this is "cringe" and is the anvil's response to
being used with the horn pointing in the wrong direction for many
years.  Just palce a small magnet on the underside of the heel
oriented the other way and after a few decades it will.....

Um, sorry, I'll just be getting my coat....

- Mike

-- 
Michael Spencer                  Nova Scotia, Canada       .~. 
                                                           /V\ 
mspencer at tallships.ca                                     /( )\
http://home.tallships.ca/mspencer/                        ^^-^^