[TheForge] Bull Air Hammer

[Ron Swisher]

Mike are you talking about the in-line filter from the compressor?  My 
in-line gage shows 125 lbs.

Ron


----- Original Message ----- 
From: "GHS" <GHS at execpc.com>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Wednesday, February 01, 2006 9:54 AM
Subject: Re: [TheForge] Bull Air Hammer


> Ron Swisher wrote:
>
>>Does anyone on the list own a 75 lb. Bull?  I have recently noticed a 
>>decrease in the bpm and an inability to get an air cushion at the top of 
>>the stroke.  I have readjusted the valves in accordance with the tape sent 
>>out by Tom Tro... entitled "Bull 75B" but this has not helped.  I shot an 
>>email to Tom via his Phoenix Hammer web site but no response.  Any 
>>thoughts?  Anyone experience similar problems?
>>
>>Ron
>>
>
> I have a Bull 90, but have never had that problem.
> Is your air filter plugged up? Lack of adequate air flow does some strange 
> things.
> Is it possible that some dirt has passed through into the valving?
> I had a chronic hiss that was caused by some crud right after I installed 
> mine. Tom talked me through flushing it out. I can not remember what we 
> used and I wouldn't want to give you a name and have it eat up seals on 
> you.
> I think Tom looks in here from time to time. He also does answer his 
> emails although sometimes it takes a while.
>
> If you do get an answer to you problem please forward me a copy for my 
> files.
>
> You know, there might be a business in this for someone, servicing Bull 
> and Phoenix hammers.
> Maybe you should suggest that to Tom when you get his attention.
> He could franchise it and train a tech or two.
>
> Mike Graf
>
>
> -- 
> Please visit us at http://www.gaudeteforge.com/
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
>