[TheForge] 14 Pin Plug

[Darrell]

Larry,
I have a spare one part # MS3106E20-27PX. It fits my Ranger 10. You would 
have to solder in the wires as it is a new plug. If you are interested at 
$35.00 it is yours.

Darrell

----- Original Message ----- 
From: "Larry and Pat Brown" <lp.brown at verizon.net>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Friday, August 25, 2006 7:33 PM
Subject: Re: [TheForge] 14 Pin Plug


> The plug is sold to mate to the Lincoln Ranger 9, 14 pin connector 
> (Female) on the machine. It came with a short set of Lettered wires 
> sticking out the back. I only need two wires for the spool gun which is 
> then connected to this adapter with the rest of the wires taped off. It's 
> a waste but I need to connect two these wires to use the gun. It still 
> works but I wont tell you how long it took to get on with that end of the 
> machine a couple of inches from the truck bed. I'll check the adapter 
> again on Monday and I'll look at the end on the machine I have here for 
> hints also
> Thanks
> Larry Brown
>
>
> At 09:27 PM 8/25/2006 -0400, you wrote:
>>I think we need more info. There are about a billion connectors, all just 
>>a little different. I think the 20-27 number is just the shell size; you 
>>need to figure out another number for the connections. It seems like there 
>>might be a number cast in the flat disk that holds the pins--get a good 
>>light and a magnifier.
>>
>>Here's Digikey's selector page:
>>http://www.digikey.com/scripts/dksearch/dksus.dll?Criteria?Ref=273175&Site=US&Cat=33489539
>>
>>Here's what I get when I select 14 pin and shell size 20-27:
>>http://www.digikey.com/scripts/dksearch/dksus.dll?Filter
>>
>>Here are pages that have some pictures and drawings:
>>http://www.mouser.com/catalog/627/1023.pdf#search=%22amphenol%20circular%20connector%2014%20pin%22
>>http://www.ssccontrols.com/homepage-connector.htm
>>
>>What model spool gun, any other numbers on the connector....give me more 
>>of a lead and I'll be happy to see what I can find.
>>
>>Steve
>>
>>Larry Brown wrote:
>>>Hi
>>>The cable that hooks my spool gun to my Lincoln Ranger 9 got dropped and 
>>>the inner ring with the slit to line it up broke off part way and is now 
>>>real hard to line up. The connector says AMPHENOL, 20-27PF on the inside 
>>>between the pins and it screws on with a outer ring. I know Lincoln wants 
>>>about $80 for it. Only two pins are used with this set up so another 
>>>(Cheaper) source would be real nice if you have any recommendations
>>>Thanks
>>>Larry Brown
>>>_______________________________________________
>>>Manage membership or unsubscribe at:
>>>http://mailman.qth.net/mailman/listinfo/theforge
>>>theforge mail list group photo site is
>>>http://www.photoaccess.com
>>>Login:  blacksmithblacksmith at hotmail.com
>>>password:  anvil
>>>___________
>>>
>>_______________________________________________
>>Manage membership or unsubscribe at:
>>http://mailman.qth.net/mailman/listinfo/theforge
>>theforge mail list group photo site is
>>http://www.photoaccess.com
>>Login:  blacksmithblacksmith at hotmail.com
>>password:  anvil
>>___________
>>
>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>