[TheForge] 14 Pin Plug

[Larry Brown]

Hi
I'll contact you off list
Thanks
Larry


At 11:13 PM 8/25/2006 -0700, you wrote:
>Larry,
>I have a spare one part # MS3106E20-27PX. It fits my Ranger 10. You would 
>have to solder in the wires as it is a new plug. If you are interested at 
>$35.00 it is yours.
>
>Darrell
>
>----- Original Message ----- From: "Larry and Pat Brown" 
><lp.brown at verizon.net>
>To: "Sponsored by ABANA" <theforge at mailman.qth.net>
>Sent: Friday, August 25, 2006 7:33 PM
>Subject: Re: [TheForge] 14 Pin Plug
>
>
>>The plug is sold to mate to the Lincoln Ranger 9, 14 pin connector 
>>(Female) on the machine. It came with a short set of Lettered wires 
>>sticking out the back. I only need two wires for the spool gun which is 
>>then connected to this adapter with the rest of the wires taped off. It's 
>>a waste but I need to connect two these wires to use the gun. It still 
>>works but I wont tell you how long it took to get on with that end of the 
>>machine a couple of inches from the truck bed. I'll check the adapter 
>>again on Monday and I'll look at the end on the machine I have here for 
>>hints also
>>Thanks
>>Larry Brown