[TheForge] 14 Pin Plug

[Larry and Pat Brown]

The plug is sold to mate to the Lincoln Ranger 9, 14 pin connector (Female) 
on the machine. It came with a short set of Lettered wires sticking out the 
back. I only need two wires for the spool gun which is then connected to 
this adapter with the rest of the wires taped off. It's a waste but I need 
to connect two these wires to use the gun. It still works but I wont tell 
you how long it took to get on with that end of the machine a couple of 
inches from the truck bed. I'll check the adapter again on Monday and I'll 
look at the end on the machine I have here for hints also
Thanks
Larry Brown


At 09:27 PM 8/25/2006 -0400, you wrote:
>I think we need more info. There are about a billion connectors, all just 
>a little different. I think the 20-27 number is just the shell size; you 
>need to figure out another number for the connections. It seems like there 
>might be a number cast in the flat disk that holds the pins--get a good 
>light and a magnifier.
>
>Here's Digikey's selector page:
>http://www.digikey.com/scripts/dksearch/dksus.dll?Criteria?Ref=273175&Site=US&Cat=33489539
>
>Here's what I get when I select 14 pin and shell size 20-27:
>http://www.digikey.com/scripts/dksearch/dksus.dll?Filter
>
>Here are pages that have some pictures and drawings:
>http://www.mouser.com/catalog/627/1023.pdf#search=%22amphenol%20circular%20connector%2014%20pin%22
>http://www.ssccontrols.com/homepage-connector.htm
>
>What model spool gun, any other numbers on the connector....give me more 
>of a lead and I'll be happy to see what I can find.
>
>Steve
>
>Larry Brown wrote:
>>Hi
>>The cable that hooks my spool gun to my Lincoln Ranger 9 got dropped and 
>>the inner ring with the slit to line it up broke off part way and is now 
>>real hard to line up. The connector says AMPHENOL, 20-27PF on the inside 
>>between the pins and it screws on with a outer ring. I know Lincoln wants 
>>about $80 for it. Only two pins are used with this set up so another 
>>(Cheaper) source would be real nice if you have any recommendations
>>Thanks
>>Larry Brown
>>_______________________________________________
>>Manage membership or unsubscribe at:
>>http://mailman.qth.net/mailman/listinfo/theforge
>>theforge mail list group photo site is
>>http://www.photoaccess.com
>>Login:  blacksmithblacksmith at hotmail.com
>>password:  anvil
>>___________
>>
>_______________________________________________
>Manage membership or unsubscribe at:
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  blacksmithblacksmith at hotmail.com
>password:  anvil
>___________
>