[TheForge] Re: brill dit stock (grrr)

[Chuck Robinson]

Bee's wax is best, totally inert with acids.
Chuck
----- Original Message ----- 
From: "Bruce Freeman" <FREEMAB at pt.fdah.com>
To: <theforge at mailman.qth.net>
Sent: Thursday, June 02, 2005 11:51 AM
Subject: RE: [TheForge] Re: brill dit stock (grrr)


If it's not too late, DON'T use play-doh.  Play-doh is salt, water, and 
cornstarch.  Acid will dissolve it.  You need something water-repellant, 
like plasticine clay (ordinary kids' toy clay).  You can sift some fine dirt 
from your yard (clay, not loam) and mix it with a heavy oil (like bar-chain 
oil) and get something that will do.  No doubt there are lots of other 
things that will work as well.

Bruce
NJ

>>> sunironworks at yahoo.com 6/2/2005 10:55:33 AM >>>
It's an 8mm bold with about a 6mm extractor in it now. I tried the
dremel approach to dish it out to get a good center punch. Messed up
the top 1/16" of the hole, no big deal. Hope play-doh holds the acid...

J

--- Ron Childers <munlaw2 at hcsmail.com> wrote:

> Justin,
>
> If all else fails, you should be able to grind the screw extractor
> out with
> a Dremmel Tool. If you mess up the threads, you can repair with a
> Helicoil
> or Keensert, etc. How big is the bolt?
>
> Ron Childers
>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
>

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________



_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________