[TheForge] Drill Press

[Mark A. Pesetsky]

I believe  :~)  the chuck on the sears has the shaft built on.

A jt33 is going to fit the hole in the drillpress.
Get an Albrecht that has a jt33 shaft. Or am I missing something?



I have the arbor out....Will take to machine shop here at work and ask them
to turn down the arbor end. Seems that 1/32-1/16 is all that will have to be
taken off for the arbor to fit the J2 hole in the ALBRECHT.

Thanks All
Mark