[Test-Equipment] Resistor measurement

[Mike Manes]

I don't own any instrumentation accurate to 0.01%, unless it's my freq
counter.  I'd just check it with an ordinary ohmmeter to see if it's
broken; if it reads about right, then believe the marking and challenge
anyone to prove ya wrong.

73 de Mike W5VSI

On 7/5/2011 21:15, Glenn Little WB4UIV wrote:
> I have a resistor marked 180002 Ohms at 0.01%.
> What instrument could be used to verify the resistance is within the
> indicated tolerance?
> Or should I just call it 180K and call it good?
>
> Thanks
> 73
> Glenn
> WB4UIV
>
>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Mike Manes    mrmanes at gmail.com     Tel: 303-979-4899
"Things should be made as simple as possible, but not more so."
A. Einstein