[TenTec] Omni V Mic Gain

[David McClafferty]

If you don't have a battery in the the mic, you try
one just to be sure you sre getting the necessary
polarizing voltage.

Dave, VE1ADH

 --- David Drake <drake@fullnet.com> wrote: > I have
an Omni V and run a TT 705 mic with it.  I
> have to run the mic gain with that mic at about
> 1-2:00 to get proper tx audio out.  I also have a
> heil hm10/hc5.  After getting the cable and
> connectors set up and the mic plugged in, I had to
> run the mic gain wide open to get any, repeat any
> decent audio out.  
> 
> Is there a mod to the TX audio board that will give
> me more mic gain?  I called TT and they said what I
> have is all I can get.  (called on this
> twice-basically same answer).  I refuse to accept
> that until further convinced.
> 
> I guess the thing that keeps sticking in my craw, is
> that with my older corsair and omni C, I ran the
> gain at about 10:00 for proper alc action and both
> worked fine with several mics.  Those radios had
> plenty of gain available.
> 
> Any mod ideas would be appreciated.  Rather not
> reinvent the wheel, so to speak.
> 
> David Drake, Wd9cmd
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post
> was in HTML
> or had an attachment.  Attachments are not allowed. 
> To learn how
> to post in Plain-Text go to:
> http://www.expita.com/nomime.html  ---
> _______________________________________________
> Tentec mailing list
> Tentec@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/tentec 

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca