[SignalOne] CX-11A question

[Fred]

Since both PTOs don't work and no audio try the BFO Board or the PTO 
mixer.  Perhaps you've lost the 43.1mhz osc
Band display comes from another direction
73 de
K5OG
Fred

Danny Goodman wrote:

>This list is for discussions regarding collecting, repair, use and sale of Signal/One radios and accessories. 
>
>Documentation on Signal/One radios can be found at http://www.hamanuals.com and several other sites on the Web.
>I've had a CX-11A for several years (got it from Paul Kluwe), but left it
>dormant for the last year or so. Upon firing it up recently, I see that the
>display shows xx.900.0, and does not change with either PTO control. The MHz
>part of the display changes with the bandswitch, and I am not getting any
>receive audio. I reseated the display board, and cycled through the PTO push
>buttons many times.
>
>Any suggestions on where to start troubleshooting?
>
>Thanks.
>
>Danny
>http://www.dannyg.com
>http://www.spamwars.com
>
>
>
>_______________________________________________
>SignalOne mailing list
>SignalOne at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/signalone
>
>  
>