[ScanIndiana] Police SWAT Splinter

Thu, 4 Apr 2002 10:47:55 -0500

OK, I will try that... Thanks
----- Original Message -----
From: "MONIX" <[email protected]>
To: <[email protected]>
Sent: Thursday, April 04, 2002 10:36 AM
Subject: [ScanIndiana] Police SWAT Splinter


> They could be using an input frequency with a different PL, I know of a
> department in Louisville which did that, the only problem is that they
might
> interfere with a user of the repeater, and if both transmit at the same
time
> you would hear the interference over the repeater output.
>
> Check the splinter/in-between/dot four digit frequencies ie. .0875, both
in
> the repeater output range and 5 MHz lower in the repeater input range.
>
> If not using Talkaround, they will probably be here, and would not
interfere
> with anything.
>
> MONIX
>
>
> > I have been on the scene and have found nothing with the outputs, but
that
> > makes me think that it could be an input with just a different PL. I use
a
> > motorola ht1250 and have never checked that...
>
>
>    ____              ____        ___
>   / __/______ ____  /  _/__  ___/ (_)__ ____  ___ _
>  _\ \/ __/ _ `/ _ \_/ // _ \/ _  / / _ `/ _ \/ _ `/
> /___/\__/\_,_/_//_/___/_//_/\_,_/_/\_,_/_//_/\_,_/
>
> ______________________________________________
> ScanIndiana mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/scanindiana
>
> Visit Indiana's source for Scanner Information!  http://www.indyscan.com