[Scan-DC] Spotsylvania EDACS

[ka3jjz at netscape.com]

Ken the only time I have this happen is if the CC is coming in too weak, or noisy, for the scanner to lock on.
See if that's the case here. In addition, it's entirely possible that the connection from the BNC to the circuit board has come loose or is off. That happened to mine, and I had to send it to the Radio Doctor since I don't have the tools to get into this. 

If the connection is good then a new antenna is called for. 73 Mike

links editor,Capitol Hill Monitors
Utility Monitoring Central
Wiki Administrator, HF Forum moderator, Radioreference.Com 

--- fxpd614 at gmail.com wrote:

From: "Kenneth Fowler" <fxpd614 at gmail.com>
To: Scan-DC <scan-dc at mailman.qth.net>
Subject: [Scan-DC] Spotsylvania EDACS
Date: Sun, 28 Sep 2008 03:45:43 -0400

I recently programmed my new BC-245 with the Spotsylvania County EDACS system
and I cannot get the scanner to stay in the trunk mode.  It almost seems like it looses
reception on the control channel.

Anyone know if they have changed any of the configurations?

 

_____________________________________________________________
Netscape.  Just the Net You Need.