[Scan-DC] Spotsylvania EDACS

[Bill]

How close are you to a Nextel site as well.    I have that happen routinely 
here in Massachusetts
and/or when traveling and near those Pesky NexHell Sites.

Bill Dunn    N1KUG
Cruise Ship Frequencies
http://home.earthlink.net/~ecps92/cruise_ships.htm
Now feeding USCG Sector Boston via Team Speak
info at http://www.scancapecod.us/index.php?pageid=nesflogon


----- Original Message ----- 
From: <ka3jjz at netscape.com>
To: <scan-dc at mailman.qth.net>
Sent: Sunday, September 28, 2008 8:02 AM
Subject: Re: [Scan-DC] Spotsylvania EDACS


> Ken the only time I have this happen is if the CC is coming in too weak, 
> or noisy, for the scanner to lock on.
> See if that's the case here. In addition, it's entirely possible that the 
> connection from the BNC to the circuit board has come loose or is off. 
> That happened to mine, and I had to send it to the Radio Doctor since I 
> don't have the tools to get into this.
>
> If the connection is good then a new antenna is called for. 73 Mike
>
> links editor,Capitol Hill Monitors
> Utility Monitoring Central
> Wiki Administrator, HF Forum moderator, Radioreference.Com
>
> --- fxpd614 at gmail.com wrote:
>
> From: "Kenneth Fowler" <fxpd614 at gmail.com>
> To: Scan-DC <scan-dc at mailman.qth.net>
> Subject: [Scan-DC] Spotsylvania EDACS
> Date: Sun, 28 Sep 2008 03:45:43 -0400
>
> I recently programmed my new BC-245 with the Spotsylvania County EDACS 
> system
> and I cannot get the scanner to stay in the trunk mode.  It almost seems 
> like it looses
> reception on the control channel.
>
> Anyone know if they have changed any of the configurations?
>
>
>