[Scan-DC] Snowplows in NoVA

Wed, 28 Jan 2004 15:04:28 +0000

47.04 is used by the safety service patrols on the interstate and it is on a 
repeater. I hear very little VDOT radio traffic and I think a news story I 
recently saw explains why that is. The story was shot inside the traffic 
management control center located in Arlington that is for VDOT traffic 
management. The guy in the piece was talking to VDOT trucks on a Nextel. I 
suspect that a lot of their operations for voice radio traffic is taking 
place there.

>From: john wilson <[email protected]>
>To: Randy Benn <[email protected]>
>CC: scan-dc <[email protected]>
>Subject: Re: [Scan-DC] Snowplows in NoVA
>Date: Mon, 26 Jan 2004 10:32:55 -0500
>
>   VDOT contractors do not use VDOT frequencies with the possible exception 
>of 45.76 mhz., constuction zone comms and a few other unique
>situations such as construction/maintenance work on the James River Bridge 
>in the Tidewater area.  Contractors  use their own radio system,
>if any, or maybe use a cell phone.  The pls you posted indicate VDOT 
>repeater operations only.  Inputs are in the 45 mhz. range.  With few
>exceptions each VDOT maintenance activity will be licensed for 6 or 7 47 
>mhz. frequencies.  Usually one repeater frequency is used for one
>or more VDOT activities in a given geographical area.  Sometimes if the 
>area is wide, such as in the Madison Co. area two repeaters will be
>used., i. e., Madison East and Madison West.  Each VDOT maintenance 
>activity typically also uses one or more simplex frequencies with
>different pls.  Frequencies used and repeater/simplex combinations vary 
>depending upon the radio usage requirements of a VDOT activity.
>
>Randy Benn wrote:
>
> > I loaded up the Pro96 with a bunch of VDOT freqs last night.  So far, 
>I've heard the following in the NoVA area, monitoring near Dulles:
> >
> > 47.08 / PL=110.9 - Arcola
> > 47.04 / PL=114.8 - Rt 50, Rt 66, Rt 395
> >
> > I'm guessing that the contractors probably don't use the VDOT radio 
>system.  Would they likely just be somewhere in the business bands?
> >
> > Randy
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > The reason this message is shown is because the post was in HTML
> > or had an attachment.  Attachments are not allowed.  To learn how
> > to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> > _______________________________________________
> > Scan-DC mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/scan-dc
>
>_______________________________________________
>Scan-DC mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/scan-dc

_________________________________________________________________
Rethink your business approach for the new year with the helpful tips here. 
http://special.msn.com/bcentral/prep04.armx