[R-390] Amphenol Twin-Ax Assembly?

[Barry]

Thanks, Jim.  That looks to be for a different connector.  I thought I remembered seeing a cut-away drawing of the one I have but I'm not finding that now.  No worries, though.  I figured it out.  

Thanks again,
Barry - N4BUQ

> Should be similar to this:
> 
> 
> https://www.mouser.com/datasheet/2/18/1/162100-2308756.pdf
> 
> 
> 
> Jim
> Logic: Method used to arrive at the wrong conclusion, with confidence.  Murphy
> 
>    On Friday, October 18, 2024 at 11:39:06 AM CDT, Barry Scott
>    <72volkswagon at gmail.com> wrote:
> 
> I received the Amphenol 83-821 that I ordered but I'm not quite sure
> how this is to be assembled and I'm not finding anything like an
> instruction sheet or video as to how to do that either.
> 
> If my guess is correct, I think the two small inner pieces slide
> together and are held together with braid (if the twin-ax is shielded)
> and then soldered.  That holds those two pieces together and then
> those are inserted into the threaded end of the shell and are then
> screwed in place.  Of course, unless the other end of the cable is
> free, the shell needs to be slid over the cable first.
> 
> Do I have that correct?
> 
> Sorry - I thought this would be rather obvious but I found it to be otherwise.
> 
> Thanks,
> Barry - N4BUQ
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>  
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html