[R-390] Amphenol Twin-Ax Assembly?

[Jim Whartenby]

Should be similar to this:


https://www.mouser.com/datasheet/2/18/1/162100-2308756.pdf



Jim
Logic: Method used to arrive at the wrong conclusion, with confidence.  Murphy 

    On Friday, October 18, 2024 at 11:39:06 AM CDT, Barry Scott <72volkswagon at gmail.com> wrote:   

 I received the Amphenol 83-821 that I ordered but I'm not quite sure
how this is to be assembled and I'm not finding anything like an
instruction sheet or video as to how to do that either.

If my guess is correct, I think the two small inner pieces slide
together and are held together with braid (if the twin-ax is shielded)
and then soldered.  That holds those two pieces together and then
those are inserted into the threaded end of the shell and are then
screwed in place.  Of course, unless the other end of the cable is
free, the shell needs to be slid over the cable first.

Do I have that correct?

Sorry - I thought this would be rather obvious but I found it to be otherwise.

Thanks,
Barry - N4BUQ
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html