[R-390] Amphenol Twin-Ax Assembly?

[gary.biasini at shaw.ca]

Barry,

I am not sure how the 83-821 compares to others but here are a couple of
sheets that might give you some idea

Good luck!

-----Original Message-----
From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
Behalf Of Barry Scott
Sent: October 18, 2024 10:39 AM
To: R-390 Mailing List <r-390 at mailman.qth.net>
Subject: [R-390] Amphenol Twin-Ax Assembly?

I received the Amphenol 83-821 that I ordered but I'm not quite sure how
this is to be assembled and I'm not finding anything like an instruction
sheet or video as to how to do that either.

If my guess is correct, I think the two small inner pieces slide together
and are held together with braid (if the twin-ax is shielded) and then
soldered.  That holds those two pieces together and then those are inserted
into the threaded end of the shell and are then screwed in place.  Of
course, unless the other end of the cable is free, the shell needs to be
slid over the cable first.

Do I have that correct?

Sorry - I thought this would be rather obvious but I found it to be
otherwise.

Thanks,
Barry - N4BUQ
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 000_32225_customer_drawing.pdf
Type: application/pdf
Size: 247065 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/r-390/attachments/20241020/732b7303/attachment.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: assembly_instructions_c19.pdf
Type: application/pdf
Size: 20828 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/r-390/attachments/20241020/732b7303/attachment-0001.pdf>