[R-390] R-390A ZERO ADJUST CLUTCH

[Larry H]

Hi Foster,  If you look down at the gears where the clutch is at, you
should be able to see the plates move apart when you turn the knob
clockwise.  If the clutch plates do not move apart, then the disc that
pushes on the 3 clutch pins is not pushing them in far enough.  If you can
see the clutch plates move apart, then they probably need to be cleaned.

Regards, Larry

On Wed, Apr 21, 2021 at 8:57 AM Foster <fosterp at pahrump.com> wrote:

> Greetings Listmates,
>
> I am having problems with a Zero Adjust Clutch. The pins are being
> pushed in OK but
>
> the clutch is not releasing.
>
> Anyone have any hints/recommendations on how to clear this problem
> certainly
>
> would be appreciated.
>
> T I A
>
> 73//Foster W4HCX
>
>
> --
> This email has been checked for viruses by AVG.
> https://www.avg.com
>
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>