[R-390] R-390A ZERO ADJUST CLUTCH

[Cecil]

And the zero adjust has a limited range. Beyond that it’s an alignment problem!

Cecil
K5DL

Sent from my iPad

> On Apr 21, 2021, at 5:39 PM, Larry H <larry41gm at gmail.com> wrote:
> 
> Hi Foster,  If you look down at the gears where the clutch is at, you
> should be able to see the plates move apart when you turn the knob
> clockwise.  If the clutch plates do not move apart, then the disc that
> pushes on the 3 clutch pins is not pushing them in far enough.  If you can
> see the clutch plates move apart, then they probably need to be cleaned.
> 
> Regards, Larry
> 
>> On Wed, Apr 21, 2021 at 8:57 AM Foster <fosterp at pahrump.com> wrote:
>> 
>> Greetings Listmates,
>> 
>> I am having problems with a Zero Adjust Clutch. The pins are being
>> pushed in OK but
>> 
>> the clutch is not releasing.
>> 
>> Anyone have any hints/recommendations on how to clear this problem
>> certainly
>> 
>> would be appreciated.
>> 
>> T I A
>> 
>> 73//Foster W4HCX
>> 
>> 
>> --
>> This email has been checked for viruses by AVG.
>> https://www.avg.com
>> 
>> ______________________________________________________________
>> R-390 mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/r-390
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:R-390 at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html