[R-390] Pinned Down - advice needed

[Raymond Cote]

GREAT info Roger.  I will use your idea and keep it handy.
> To: R-390 at mailman.qth.net
> From: flowertime01 at wmconnect.com
> Date: Thu, 21 Jun 2012 18:50:37 -0400
> Subject: Re: [R-390] Pinned Down - advice needed
> 
> 
> Chris,
> 
> You may want to get your self a pair of vise grip pliers.
> 
> Set the up in the drill press and drill a very small hole in one jaw.
> 
> Into the small hole you would like to insert a short length of the drill
> bit you used to drill that hole.
> 
> You now have a pin in a pair of pliers you could use to work the roll 
> pin out of the collar and shaft.
> 
> You could pull a small bench vise apart and drill a hole in it
> Some thing to make up a small press.
> 
> Roger AI4NI
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html