[R-1051] R-1051 Mounting brackets

Chris Kucera chris.kucera at gmail.com
Tue Dec 7 20:05:11 EST 2010


I will have to see if I can find some angle iron that is big enough for the 
bracket.  Most everything I see at the Big R is flat pieces and that angle 
iron that has the holes on both sides.

----- Original Message ----- 
From: "paul swed" <paulswedb at gmail.com>
To: "R-1051 Discussion Group" <r-1051 at mailman.qth.net>
Sent: Tuesday, December 07, 2010 2:56 PM
Subject: Re: [R-1051] R-1051 Mounting brackets


> As I mentioned get angle iron its already bent 90 degrees.
> All you do is cut it and then drill holes.
> Did that 10 plus years ago and the brackets are holding a 1051 and also a 
> RT
> unit of the same ilk.
> Boy been a while I don't remember the RT unit model number.
>
> On Tue, Dec 7, 2010 at 3:38 PM, Chris Kucera <chris.kucera at gmail.com> 
> wrote:
>
>> I'd buy a set for 25 bucks a set also.  It would be easier than the 
>> hammer
>> and vise trick I'm thinking about doing.
>>
>> On Tue, Dec 7, 2010 at 10:53 AM, mikea <mikea at mikea.ath.cx> wrote:
>>
>> > On Tue, Dec 07, 2010 at 12:35:35PM -0500, Tony Snider wrote:
>> > > what do you guys feel a fair price per set would be??  I have a good
>> > friend
>> > > that runs a milspec metal shop and could make these with his eyes
>> > closed..
>> > > maybe I could do an run of maybe 100 sets.   I could use maybe 10 
>> > > sets.
>> > they
>> > > will be made on a press with punched out holes.  quality just like
>> > originals
>> > >
>> > > they would be just the plates with drilled holes and the mounting 
>> > > ears.
>> > with
>> > > no side holes or rear supports (hopefully your radio room wont
>> experiance
>> > > heavy seas)
>> > >
>> > > I could have them milspec painted haze gray or not  what are your
>> > thoughts??
>> > >
>> > > they will fit all models of R-1051 , T-827, RT-618
>> > >
>> > > I could make them for the AM-3007 and the 1KW amp also if any 
>> > > interest
>> >
>> > I'd buy 3 sets at $25/set, I would indeed.
>> >
>> > --
>> > Mike Andrews, W5EGO
>> > mikea at mikea.ath.cx
>> > Tired old sysadmin
>> > ______________________________________________________________
>> >  R-1051 mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/r-1051
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:R-1051 at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> >
>> ______________________________________________________________
>> R-1051 mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/r-1051
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:R-1051 at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> R-1051 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-1051
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-1051 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 



More information about the R-1051 mailing list