[R-1051] R-1051 Mounting brackets

paul swed paulswedb at gmail.com
Tue Dec 7 16:56:14 EST 2010


As I mentioned get angle iron its already bent 90 degrees.
All you do is cut it and then drill holes.
Did that 10 plus years ago and the brackets are holding a 1051 and also a RT
unit of the same ilk.
Boy been a while I don't remember the RT unit model number.

On Tue, Dec 7, 2010 at 3:38 PM, Chris Kucera <chris.kucera at gmail.com> wrote:

> I'd buy a set for 25 bucks a set also.  It would be easier than the hammer
> and vise trick I'm thinking about doing.
>
> On Tue, Dec 7, 2010 at 10:53 AM, mikea <mikea at mikea.ath.cx> wrote:
>
> > On Tue, Dec 07, 2010 at 12:35:35PM -0500, Tony Snider wrote:
> > > what do you guys feel a fair price per set would be??  I have a good
> > friend
> > > that runs a milspec metal shop and could make these with his eyes
> > closed..
> > > maybe I could do an run of maybe 100 sets.   I could use maybe 10 sets.
> > they
> > > will be made on a press with punched out holes.  quality just like
> > originals
> > >
> > > they would be just the plates with drilled holes and the mounting ears.
> > with
> > > no side holes or rear supports (hopefully your radio room wont
> experiance
> > > heavy seas)
> > >
> > > I could have them milspec painted haze gray or not  what are your
> > thoughts??
> > >
> > > they will fit all models of R-1051 , T-827, RT-618
> > >
> > > I could make them for the AM-3007 and the 1KW amp also if any interest
> >
> > I'd buy 3 sets at $25/set, I would indeed.
> >
> > --
> > Mike Andrews, W5EGO
> > mikea at mikea.ath.cx
> > Tired old sysadmin
> > ______________________________________________________________
> >  R-1051 mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/r-1051
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:R-1051 at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> R-1051 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-1051
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-1051 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


More information about the R-1051 mailing list