[Pro2006] Pro-2006 squelch problem

[Len G. Carpenter]

I would be yanking the opto board out then reconnect the scanner back to stock
and see if the scanner now works, if it does you now know that the problem
relates to the opto board, could be just corroded connectors.

Classified wrote:

> Any of the 2006/456 Opto gurus ever had this problem.....2006 when in
> scanning mode I can turn the squelch all the way down and there isn't any...
> .....hit manual or program and the squelch works fine.......ok now that's
> conventional by the way with out the 456 ....ok using Probe to control the
> 456 ....it will only work on 19,2 baud.....will scan but will not RX
> anything......BUT if I go into frequencies (F key on Probe) it picks up fine
> MANUALLY......any ideas , I'd sure appreciate some input ....thanks 100%
>
> <Tom - Maine>
> _______________________________________________
> Pro2006 mailing list
> Pro2006 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/pro2006

--


Bumper sticker of the year: If you can read this, thank a
teacher....and since it's in English, thank a soldier."