[Pro2006] Pro-2006 squelch problem

[Classified]

Any of the 2006/456 Opto gurus ever had this problem.....2006 when in
scanning mode I can turn the squelch all the way down and there isn't any...
.....hit manual or program and the squelch works fine.......ok now that's
conventional by the way with out the 456 ....ok using Probe to control the
456 ....it will only work on 19,2 baud.....will scan but will not RX
anything......BUT if I go into frequencies (F key on Probe) it picks up fine
MANUALLY......any ideas , I'd sure appreciate some input ....thanks 100%



<Tom - Maine>