[Pro2006] Parallel port PC Interface and ProgramIT software

[Len G. Carpenter]

Np Ed,

I figured it had to be one of two things because it did work, just not
correctly.
A buddy had built a few of them an dI was going to till I decided to go with
the CE/HB-232.
To bad you couldn't get your hands on a CE/HB-232, if you think the PROgrammit
is slick you should see the CE/HB-232 work with the Pro-Turbo software, full
control of the scanner, whatever you can do from the keypad you can do through
software, plus many other things.

Cheers

Len

Ed Tissink wrote:

> Thanks for your prompt reply Len
>
> I have to confess my initial reaction to your post was along the lines of
> 'what do you take me for, of course my wiring is correct'  However, saying
> you had seen it running made me decide to have (yet) another look and I did
> indeed have my X and Y's crossed.  Works a treat now.  I'd recommend it,
> cheap and easy to build (if you wire it correctly).
>
> Thanks
> Ed
>
> -----Original Message-----
> From: Len G. Carpenter [mailto:Len.C@sympatico.ca]
> Sent: Tuesday, 2 July 2002 11:06 AM
> To: pro2006@mailman.qth.net
> Subject: Re: [Pro2006] Parallel port PC Interface and ProgramIT software
>
> I have not built it but have seen it running, I went with a CE/HB-232, that
> one
> does program the scanner but you have to make sure you have set it up
> correctly,, also check you wiring, make sure they all go to the right place,
> if
> you are getting wrong key press you maybe have some lines mixed up, if all
> is
> correct then you have the button map wrong.
>
> The information contained in this email is privileged and confidential and
> intended for the addressee only. If you are not the intended recipient, you
> are asked to respect that confidentiality and not disclose, copy or make use
> of its contents. If received in error you are asked to destroy this email
> and contact the sender immediately. Your assistance is appreciated.
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Pro2006 mailing list
> Pro2006@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/pro2006