[PCR-1000] Attic or roof mount?

Brian W. Antoine [email protected]
Wed, 29 Jan 2003 13:10:47 -0800


At 12:55 PM 1/29/2003, you wrote:
>Lets go one further,
>How much difference is there between placing a QFH in the attic or on the
>roof?
>
>My problem lies in the fact that I don't want it to be seen from the street.
>This means I will have to mount it on the slant on the back side of the
>roof.
>This also means I will have to build (or find) a tripod with offset legs.
>But, If I mount it in the attic, I can hang it from the center of the roof
>thus getting the most elevation.
>But then again, If having it in the attic is going to cut down on the
>signal, I'm going to be better off mounting it on the roof.
>
>What have you guys found?

   I'm running a turnstile at the moment with it sitting beneath the asphalt
shingle roof of my garage.  I get "acceptable" pictures, but only during the
higher points of the pass and any pass near the horizon is pretty worthless.
I've hauled the whole mess outside to test and found that I get a wider band
of the pass that is noise free but I still don't get a good signal near the
horizon.  For that I'll have to haul it up on the roof so I get a clear view
over nearby houses and trees.

   Basically, if you're only interested in weather images near your home 
location,
under the roof will probably be fine.  If you're looking for the largest clear
image you can get, put it above the roof as high as you have to in order to see
over nearby obstructions.