[PCR-1000] Win XP and Icom Software

Fri, 26 Apr 2002 02:42:34 -0500

There was no documentation with the DSP.  The software is supposed to 
'sense' the DSP and automatically show the DSP control panel with 3 
dials on it.  I might try setting this to 1 and see what happens.  I 
know that Scancat Gold operates the filter flawlessly.  It does work.

Harry

A10382 wrote:

> There is also a 'DSPON' entry in the .ini file, along with entries for
> 'DSPANF' and 'DSPNR'.
> 
> I do not have the DSP and both of mine are set to 0.  Was these any
> documentation with DSP ?  Or did it come pre-installed in the receiver ?
> 
> I do have a separate s/w DSP application.  Runs with input from the
> soundcard - much like PSK31, CW, and RTTY soundcard based decoders.  Got it
> from a ham's shack site a while ago.  It looks pretty, but not being a
> filter designer, I haven't had much use for it.
> 
> 
> 
> 
> 
> 
> <<---  END OF MESSAGE --->>
> ----- Original Message -----
> From: "Harry Flaxman" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, April 25, 2002 8:39 PM
> Subject: Re: [PCR-1000] Win XP and Icom Software
> 
> 
> 
>>Alas, this still doesn't show the DSP filter display!
>>
>>Harry
>>
>>
>>A10382 wrote:
>>
>>
>>>It's set, in ICOM's .ini file, by default to:
>>>
>>>        TOOLBARSHOW=1
>>>
>>>Change it to:
>>>
>>>        TOOLBARSHOW=0
>>>
>>>
>>>
>>><<---  END OF MESSAGE --->>
>>>----- Original Message -----
>>>From: "Jeffrey P. Bakke" <[email protected]>
>>>To: <[email protected]>
>>>Sent: Thursday, April 25, 2002 3:53 PM
>>>Subject: Re: [PCR-1000] Win XP and Icom Software
>>>
>>>
>>>
>>>
>>>>A while back someone posted the answer to the NT/2000/XP problems with
>>>>
> the
> 
>>>>original ICOM PCR-1000 software.
>>>>
>>>>What you need to do is install the software and then before running it,
>>>>there is a .INI file in the install directory, somewhere in that INI
>>>>
> file
> 
>>>>there is an entry something like (I don't have it in front of me)
>>>>"toolbar=1" or something.  This is the icon toolbar that shows up in the
>>>>software.  Set this to '0' and the toolbar will be removed, but it will
>>>>allow the software to work correctly under Windows NT/2000/XP.  I have
>>>>
> it
> 
>>>>running fine on my Windows XP laptop with the DSP unit installed and
>>>>working.
>>>>
>>>>-Jeff Bakke
>>>>KC2IHZ
>>>>[email protected]
>>>>
>>>>
>>>>----- Original Message -----
>>>>From: "Harry Flaxman" <[email protected]>
>>>>To: "PCR-1000 Mail List" <[email protected]>
>>>>Sent: Wednesday, April 24, 2002 9:14 PM
>>>>Subject: [PCR-1000] Win XP and Icom Software
>>>>
>>>>
>>>>
>>>>
>>>>>Has anyone out there been able to use the Icom software, with the
>>>>>PCR-1000, with a UT-106 installed under Win XP?  I have posted on
>>>>>several newsgroups only to find one other person who is having the same
>>>>>problem.  I can get Scancat Gold to work, but not the original Icom
>>>>>software.  Without the UT-106 installed, the software works fine, but
>>>>>with the filter in, it bombs out when it is trying to bring up the
>>>>>filter knobs display segment.....and it looks like it's bombing on a
>>>>>display DLL within the OS.  I have tried 95 and 98 compatibility modes,
>>>>>to no avail.
>>>>>
>>>>>Thanks for any feedback!
>>>>>
>>>>>Harry
>>>>>
>>>>>
>>>>>
>>>>>_______________________________________________
>>>>>PCR-1000 mailing list
>>>>>[email protected]
>>>>>http://mailman.qth.net/mailman/listinfo/pcr-1000
>>>>>
>>>>>
>>>>_______________________________________________
>>>>PCR-1000 mailing list
>>>>[email protected]
>>>>http://mailman.qth.net/mailman/listinfo/pcr-1000
>>>>
>>>>
>>>>
>>>_______________________________________________
>>>PCR-1000 mailing list
>>>[email protected]
>>>http://mailman.qth.net/mailman/listinfo/pcr-1000
>>>
>>>
>>>
>>
>>
>>_______________________________________________
>>PCR-1000 mailing list
>>[email protected]
>>http://mailman.qth.net/mailman/listinfo/pcr-1000
>>
>>
> 
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000
> 
> 