[PCR-1000] Win XP and Icom Software

Thu, 25 Apr 2002 21:36:41 -0400

There is also a 'DSPON' entry in the .ini file, along with entries for
'DSPANF' and 'DSPNR'.

I do not have the DSP and both of mine are set to 0.  Was these any
documentation with DSP ?  Or did it come pre-installed in the receiver ?

I do have a separate s/w DSP application.  Runs with input from the
soundcard - much like PSK31, CW, and RTTY soundcard based decoders.  Got it
from a ham's shack site a while ago.  It looks pretty, but not being a
filter designer, I haven't had much use for it.

<<---  END OF MESSAGE --->>
----- Original Message -----
From: "Harry Flaxman" <[email protected]>
To: <[email protected]>
Sent: Thursday, April 25, 2002 8:39 PM
Subject: Re: [PCR-1000] Win XP and Icom Software

> Alas, this still doesn't show the DSP filter display!
>
> Harry
>
>
> A10382 wrote:
>
> > It's set, in ICOM's .ini file, by default to:
> >
> >         TOOLBARSHOW=1
> >
> > Change it to:
> >
> >         TOOLBARSHOW=0
> >
> >
> >
> > <<---  END OF MESSAGE --->>
> > ----- Original Message -----
> > From: "Jeffrey P. Bakke" <[email protected]>
> > To: <[email protected]>
> > Sent: Thursday, April 25, 2002 3:53 PM
> > Subject: Re: [PCR-1000] Win XP and Icom Software
> >
> >
> >
> >>A while back someone posted the answer to the NT/2000/XP problems with
the
> >>original ICOM PCR-1000 software.
> >>
> >>What you need to do is install the software and then before running it,
> >>there is a .INI file in the install directory, somewhere in that INI
file
> >>there is an entry something like (I don't have it in front of me)
> >>"toolbar=1" or something.  This is the icon toolbar that shows up in the
> >>software.  Set this to '0' and the toolbar will be removed, but it will
> >>allow the software to work correctly under Windows NT/2000/XP.  I have
it
> >>running fine on my Windows XP laptop with the DSP unit installed and
> >>working.
> >>
> >>-Jeff Bakke
> >>KC2IHZ
> >>[email protected]
> >>
> >>
> >>----- Original Message -----
> >>From: "Harry Flaxman" <[email protected]>
> >>To: "PCR-1000 Mail List" <[email protected]>
> >>Sent: Wednesday, April 24, 2002 9:14 PM
> >>Subject: [PCR-1000] Win XP and Icom Software
> >>
> >>
> >>
> >>>Has anyone out there been able to use the Icom software, with the
> >>>PCR-1000, with a UT-106 installed under Win XP?  I have posted on
> >>>several newsgroups only to find one other person who is having the same
> >>>problem.  I can get Scancat Gold to work, but not the original Icom
> >>>software.  Without the UT-106 installed, the software works fine, but
> >>>with the filter in, it bombs out when it is trying to bring up the
> >>>filter knobs display segment.....and it looks like it's bombing on a
> >>>display DLL within the OS.  I have tried 95 and 98 compatibility modes,
> >>>to no avail.
> >>>
> >>>Thanks for any feedback!
> >>>
> >>>Harry
> >>>
> >>>
> >>>
> >>>_______________________________________________
> >>>PCR-1000 mailing list
> >>>[email protected]
> >>>http://mailman.qth.net/mailman/listinfo/pcr-1000
> >>>
> >>_______________________________________________
> >>PCR-1000 mailing list
> >>[email protected]
> >>http://mailman.qth.net/mailman/listinfo/pcr-1000
> >>
> >>
> >
> > _______________________________________________
> > PCR-1000 mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/pcr-1000
> >
> >
>
>
>
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000
>