[nrv-hams] Cloyd's Mt Repeater Status

[James Hassall]

Cam,

N4OTX and I had a short QSO tonight in lieu of the net.  He TXd VHF and I
TXd UHF.  Both our signals were L/C, no noise at all on his signal when I
listened UHF.  VHF on my 2m dipole was noisy, but I suspect the antenna,
not the repeater, as my HT was pretty clear on VHF.  KN4CQV reported both
our signals L/C, but he didn't mention on which he was listening.

I hope this info helps.  Thanks for your work on the repeater.

73s

jim  W4BEA

On Wed, May 22, 2024 at 4:34 PM Cam Coble <cam at doubleclickdata.com> wrote:

> Work was done today on the Cloyd's Mountain repeater.
> Please let us know if you have any trouble getting into that repeater.
> Be as detailed as possible, including what repeater you were transmitting
> into, and which transmitter you were listening to.
> We are looking for changes, good or bad.
>
> Also, we have disabled the Winlink Gateway (AI4RC-9) at that location
> temporarily.
>
> Big thanks to Roy, W4DFD for the help, along with Patrick, KN4PDL, and
> Christopher, K4HZ.
>
> 73,
> --
> Cam, W4XXV
> ______________________________________________________________
> nrv-hams mailing list
> Home: http://mailman.qth.net/mailman/listinfo/nrv-hams
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:nrv-hams at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>