[nrv-hams] Cloyd's Mt Repeater Status

[J.C. Hassall]

Edited: I need to pay closer attention when typing instead of the XYL!  See
edits below :-p

On Thu, May 23, 2024 at 8:22 PM James Hassall <jhassall at vt.edu> wrote:

> Cam,
>
> N4OTX and I had a short QSO tonight in lieu of the net.  He TXd VHF and I
> TXd UHF.  Both our signals were L/C, no noise at all on his signal when I
> listened UHF [EDIT: listened VHF].  VHF on my 2m dipole was noisy, but I
> suspect the antenna,
> not the repeater, as my HT was pretty clear on VHF.  KN4CQV reported both
> our signals L/C, but he didn't mention on which he was listening.
>
> I hope this info helps.  Thanks for your work on the repeater.
>
> 73s
>
> jim  W4BEA
>
> On Wed, May 22, 2024 at 4:34 PM Cam Coble <cam at doubleclickdata.com> wrote:
>
> > Work was done today on the Cloyd's Mountain repeater.
> > Please let us know if you have any trouble getting into that repeater.
> > Be as detailed as possible, including what repeater you were transmitting
> > into, and which transmitter you were listening to.
> > We are looking for changes, good or bad.
> >
> > Also, we have disabled the Winlink Gateway (AI4RC-9) at that location
> > temporarily.
> >
> > Big thanks to Roy, W4DFD for the help, along with Patrick, KN4PDL, and
> > Christopher, K4HZ.
> >
> > 73,
> > --
> > Cam, W4XXV
> > ______________________________________________________________
> > nrv-hams mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/nrv-hams
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:nrv-hams at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> nrv-hams mailing list
> Home: http://mailman.qth.net/mailman/listinfo/nrv-hams
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:nrv-hams at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
jim  W4BEA