[NLRS] 1296 and 10GHz transverter boards/parts FS

[Jack]

Well, that was quick, but I thought it would be. The W1GHZ transverter 
parts are sold.

Thanks!

Jack

On 2/11/2021 8:41 PM, Jack wrote:
> If it is okay I thought I'd post this here before going elsewhere. I 
> would prefer to sell all the following as a package.
>
> About a year ago I bought some circuit boards from W1GHZ with the 
> intention of building transverters for 1296MHz and 10GHz. Things have 
> gotten to the point where I can no longer deal with small SMDs and I 
> have decided to sell the boards and components that I have accumulated.
>
> For the 1296 transverter I have the PC board with DBM and LO splitter 
> mounted and all active devices except for the receiver front-end MMIC 
> (SG-3586Z or GALI-39). I have most of the chip caps (missing five 18pf 
> units) but have none of the bias resistors or the 33nH RFC. the PC 
> mounted SMA connectors are included.
>
> On the 1152MHz LO board I have the board and all three of the MMICs 
> (MAR-3 and two MAR-6s) plus the SMA output connector. I have all of 
> the chip capacitors but none of the MMIC bias resistors. Since I was 
> planning to use an external 96MHz source none of the components in the 
> TCXO circuit and 5V regulator were acquired.
>
> The 10GHz transverter includes the PC board (latest version as of 
> early 2020), DBM, all six NLB-310 MMICs, and SMA connectors. As far as 
> I know I have all the passive components as well as the required pipe 
> caps for filters.
>
> For 10GHz there are two LO multiplier boards. One is the x9 version 
> (which can also be built as a beacon transmitter) and the other is the 
> x2/3/4 version. I have no other components for these except for the 
> SMA connectors and pipe caps.
>
> Also, there is one of the little PA boards Paul refers to as "A Modest 
> Power Amplifier" that can achieve +19dbm linear Pout from 902 to 
> 5760MHz for 0 to +3db input with a single GVA-84 MMIC, which is 
> provided, along with two SMA connectors.
>
> Finally, there are five of the little boards that can be used either 
> as a transmit amplifier (GVA-84 or ADL-5324 MMICs) or preamp (PGA-103 
> MMIC among others). I have three of the GVA-84s, two ADL-5324s, and 
> two ADL-5544s which will be included along with my last four SMA 
> connectors.
>
> I have at least $150 invested in all the boards and components and 
> will be willing to sell everything for $85 (the boards and DBMs alone 
> sell for $78) shipping paid the the US only.
>
> If interested either reply to this e-mail or call me at 218-686-5886.
>
> 73,
>
> Jack, K0JP/VE3RUA
> Karlstad, MN

-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus