[NLRS] 1296 and 10GHz transverter boards/parts FS

[Jack]

If it is okay I thought I'd post this here before going elsewhere. I 
would prefer to sell all the following as a package.

About a year ago I bought some circuit boards from W1GHZ with the 
intention of building transverters for 1296MHz and 10GHz. Things have 
gotten to the point where I can no longer deal with small SMDs and I 
have decided to sell the boards and components that I have accumulated.

For the 1296 transverter I have the PC board with DBM and LO splitter 
mounted and all active devices except for the receiver front-end MMIC 
(SG-3586Z or GALI-39). I have most of the chip caps (missing five 18pf 
units) but have none of the bias resistors or the 33nH RFC. the PC 
mounted SMA connectors are included.

On the 1152MHz LO board I have the board and all three of the MMICs 
(MAR-3 and two MAR-6s) plus the SMA output connector. I have all of the 
chip capacitors but none of the MMIC bias resistors. Since I was 
planning to use an external 96MHz source none of the components in the 
TCXO circuit and 5V regulator were acquired.

The 10GHz transverter includes the PC board (latest version as of early 
2020), DBM, all six NLB-310 MMICs, and SMA connectors. As far as I know 
I have all the passive components as well as the required pipe caps for 
filters.

For 10GHz there are two LO multiplier boards. One is the x9 version 
(which can also be built as a beacon transmitter) and the other is the 
x2/3/4 version. I have no other components for these except for the SMA 
connectors and pipe caps.

Also, there is one of the little PA boards Paul refers to as "A Modest 
Power Amplifier" that can achieve +19dbm linear Pout from 902 to 5760MHz 
for 0 to +3db input with a single GVA-84 MMIC, which is provided, along 
with two SMA connectors.

Finally, there are five of the little boards that can be used either as 
a transmit amplifier (GVA-84 or ADL-5324 MMICs) or preamp (PGA-103 MMIC 
among others). I have three of the GVA-84s, two ADL-5324s, and two 
ADL-5544s which will be included along with my last four SMA connectors.

I have at least $150 invested in all the boards and components and will 
be willing to sell everything for $85 (the boards and DBMs alone sell 
for $78) shipping paid the the US only.

If interested either reply to this e-mail or call me at 218-686-5886.

73,

Jack, K0JP/VE3RUA
Karlstad, MN

-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus