[NCARC] Can't get into 115 or 275

[Richard Huebner]

Hi Paul,

Your outgoing tone needs to be 100Hz to get in. That is all that is
required. Your receive tone will keep you from getting other interference
that breaks your squelch, but isn't necessary. Try without your receive
tone and you should get into the 145.115 and 447.275. I am not able to make
the receive tone work, either, but that shouldn't keep you from getting in.

Anybody know what the receive tones are?

Thanks,
Rick, W0RCY


On Mon, Aug 25, 2014 at 12:28 PM, Paul Davis <pauld at phdavis.com> wrote:

> Hi Guys,
>
> I know that the tone on the 145.115 and 447.275 has changed but now I can’t
> seem to get into the either.
> I’ve checked and made sure that RX tone is set correctly for both 110.9.
> I’ve got Kenwood TS-2000 but can’t find anywhere to check the TX tone.  I
> was able to access both repeaters before.
>
> Any idea what I have setup wrong?
>
> Thanks,
>
> Paul H Davis
> Pauld at phdavis.com
> Cell: 720-935-2275
>
>
> Thanks,
>
> Paul H Davis
> Pauld at phdavis.com
> Cell: 720-935-2275
>
>
>
> ______________________________________________________________
> NCARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ncarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NCARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>