[MVMA] CPE510

[William Curtice]

2.4 Omni at MVHS is still active.

On Tue, Apr 20, 2021, 10:42 AM John Westerkamp <westerkampj at gmail.com>
wrote:

> It does look like that device is supported by the AREDN firmware.
>
> Also, I still have the 2.4 GHz Nanostation loaner kit we were going to try
> out before Covid hit. I could try that at your place to see if we can get
> to MVHS, but I am not sure there are any 2.4 nodes pointed your way?
>
> Thanks!
>
> John
> W8LRJ
>
> On Tue, Apr 20, 2021 at 9:53 AM John Westerkamp <westerkampj at gmail.com>
> wrote:
>
>> Go to AREDN mesh page under Software to see what devices are supported.
>> You have to install new special mesh firmware.
>>
>> Arednmesh.org
>>
>> It will have to be installed high up. Won't go through trees. It must
>> have an Ethernet connection. Power is supplied over the Ethernet.
>>
>> Thanks!
>>
>> John
>> W8LRJ
>>
>>
>>
>> On April 20, 2021 6:58:17 AM EDT, bobf at omegaiq.com wrote:
>>>
>>>
>>>
>>> Hi,
>>>
>>>
>>>
>>> A dish would not be stealthy since I need to put it high and close to
>>> the house. HOA and wife most likely will have an issue because of height
>>> and/ or location
>>>
>>>
>>>
>>> Any reason I can not use the following to get started:
>>>
>>>
>>> https://www.amazon.com/dp/B00N2RO63U/ref=olp_aod_early_redir?_encoding=UTF8&aod=1
>>>
>>>
>>>
>>> Do all of the options require an outdoor ethernet connection as well as
>>> power?
>>>
>>>
>>>
>>> Bob
>>>
>>>
>>>
>>> Bob French PMP, ACP
>>>
>>> AC8ZU
>>>
>>>
>>>
>>
> _______________________________________________
> MVMA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mvma
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MVMA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20210420/c2225f29/attachment.html>