[MRCA] art13 dynamotor cable

[Jeep Platt]

I use good quality, #16 for the filament leads. #18 is ok for the 400v and control wiring. Ground is #16. For the 1150v line, I use the center conductor from a piece of RG-8X coax. As outer shield, I use opened flat braid and Voltrex fabric tubing.  So far, no issues with maybe 6 ART-13 setups.


Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: mrca-bounces at mailman.qth.net <mrca-bounces at mailman.qth.net> on behalf of comcast <kg2bz at comcast.net>
Sent: Sunday, June 11, 2023 10:16:25 AM
To: B. Smith <smithab11 at comcast.net>; Military Radio Collectors Association <MRCA at mailman.qth.net>
Subject: [MRCA] art13 dynamotor cable

folks
thanks to Robert Downs from awhile ago I acquired the plugs for both ends of the art13 and dynamotor dc cable.  can anyone tell me what size/voltage rating  conductors I need to use for the multiconductor cable and also should it be shielded/bonded?  thanks Jeff N2IA
I am making up the cable
______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20230611/a7bf36c5/attachment.html>