I use good quality, #16 for the filament leads. #18 is ok for the 400v and control wiring. Ground is #16. For the 1150v line, I use the center conductor from a piece of RG-8X coax. As outer shield, I use opened flat braid and Voltrex fabric tubing. So far, no issues with maybe 6 ART-13 setups.

From: [email protected] <[email protected]> on behalf of comcast <[email protected]>
Sent: Sunday, June 11, 2023 10:16:25 AM
To: B. Smith <[email protected]>; Military Radio Collectors Association <[email protected]>
Subject: [MRCA] art13 dynamotor cable

folks
thanks to Robert Downs from awhile ago I acquired the plugs for both ends of the art13 and dynamotor dc cable. can anyone tell me what size/voltage rating conductors I need to use for the multiconductor cable and also should it be shielded/bonded? thanks Jeff N2IA
I am making up the cable
______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html