[MRCA] GRC-9 Power Connectors

[telegrapher at att.net]

I have that cable setting here along with a couple of the connectors
that i have no use for.  one piece of a cable along with a connector is
listed on Ebay.  The complete cable you are looking for has not been
listed yet.

Larry
W0OGH


Richard Arland wrote:
> 
> OK, Mike...thanks. I have a "search" in on GRC-9 on e-bay, so I'll have a
> source for the cable should one come available.
> 
> 73 es tnx.
> 
> Rich K7SZ
> 
> ----- Original Message -----
> From: "Mike Morrow" <kk5f at earthlink.net>
> To: <mrca at mailman.qth.net>
> Sent: Thursday, November 04, 2004 5:41 PM
> Subject: Re: [MRCA] GRC-9 Power Connectors
> 
> > Rich wrote:
> >
> >> Well, I'm getting closer to getting my GRC-9 on the air.
> >> Unfortunately I cannot find the CD-1086 cable I need to
> >> go between the DY-106 24 V Dyno supply and the rig.
> >
> > The cord CD-1086 consists of eight conductors and a braided copper shield,
> > seven feet long.  The female PL-279 end goes to the RT-77, while the male
> > PL-294 goes to the DY-105.
> >
> > These plugs, and complete CD-1086 cords, show up fairly regularly on ebay.
> > That was my source for the last PL-279 that I needed.
> >
> > 73,
> > Mike / KK5F
> > _______________________________________________
> > MRCA mailing list
> > MRCA at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/mrca
> 
> _______________________________________________
> MRCA mailing list
> MRCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/mrca