[MRCA] GRC-9 Power Connectors

[Richard Arland]

OK, Mike...thanks. I have a "search" in on GRC-9 on e-bay, so I'll have a 
source for the cable should one come available.

73 es tnx.

Rich K7SZ

----- Original Message ----- 
From: "Mike Morrow" <kk5f at earthlink.net>
To: <mrca at mailman.qth.net>
Sent: Thursday, November 04, 2004 5:41 PM
Subject: Re: [MRCA] GRC-9 Power Connectors


> Rich wrote:
>
>> Well, I'm getting closer to getting my GRC-9 on the air.
>> Unfortunately I cannot find the CD-1086 cable I need to
>> go between the DY-106 24 V Dyno supply and the rig.
>
> The cord CD-1086 consists of eight conductors and a braided copper shield, 
> seven feet long.  The female PL-279 end goes to the RT-77, while the male 
> PL-294 goes to the DY-105.
>
> These plugs, and complete CD-1086 cords, show up fairly regularly on ebay. 
> That was my source for the last PL-279 that I needed.
>
> 73,
> Mike / KK5F
> _______________________________________________
> MRCA mailing list
> MRCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/mrca