[Motorola] HT-1000 Cloning, RIB and cables

[K0DAN]

Easy fella!

What I said was "The HT1000 is identical or very similar." What I meant to 
COMMUNICATE was that the CLONING is identical or very similar. Obviously, 
the radios are different.

I was trying to help the guy who made the original post. If you can help 
him, please do!

dt

----- Original Message ----- 
From: "Richard J. Fiero II W5TFW" <joeyw5tfw at gmail.com>
To: "Discussion of equipment manufactured by Motorola" 
<motorola at mailman.qth.net>
Sent: Wednesday, May 05, 2010 6:38 PM
Subject: Re: [Motorola] HT-1000 Cloning, RIB and cables


> the same ?
>
> wait a min !
>
> I have both and they are not the same.
>
>                                                    Joey
>
>
>
>                                                      A.R.S. W5TFW
>                                                      Richard J. Fiero II
>
>                                                      www.6mt.com
>                                                      www.w5tfw.com
>
> LIFE'S   TOUGH !
>
> It's even tougher, if you are STUPID !
>
>                                          John Wayne
> ----- Original Message ----- 
> From: "K0DAN" <k0dan at comcast.net>
> To: "Discussion of equipment manufactured by Motorola"
> <motorola at mailman.qth.net>
> Sent: Wednesday, May 05, 2010 6:28 PM
> Subject: Re: [Motorola] HT-1000 Cloning, RIB and cables
>
>
>> Here's HT600/MT1000 cloning instructions. The HT1000 is identical or very
>> similar. You can build up your own cloning cables but the trick will be
>> finding suitable accessory connectors for the radios. One trick is to cut
>> up
>> a pair of speaker-mics and splice the cables/pins as needed. The BATLABS
>> site should have documentation on the pinouts.
>>
>> Good luck.
>>
>> dt
>>
>> INSTRUCTIONS FOR USE OF THE HT600/MT1000 CLONING CABLE
>>
>>
>>
>>
>>
>> 1. Remove the covers on the top of the radios which protect the external
>> audio/data I/O connectors (Universal Connector).
>>
>>
>> 2. Connect the cloning cable to the Universal Connector of both radio A
>> (the
>> "master") and radio B (the "slave").
>>
>>
>> 3. Turn OFF radio A.
>>
>>
>> 4. Turn ON radio B.
>>
>>
>> 5. Place the PL switch on radio A to the carrier squelch position (shows 
>> a
>> speaker symbol with no line through it) for full cloning. Full cloning
>> will
>> duplicate all frequency, PL, paging, deviation, squelch, and volume
>> settings
>> from radio A to radio B.
>>
>>
>> 6. Simultaneously depress the PTT and monitor button on radio A and hold.
>>
>>
>> 7. Turn on radio A. The green LED on radio B will flash
>>
>> indicating cloning is in progress.
>>
>>
>> 8. Cloning is complete once the green LED turns off and an alert tone is
>> heard from radio B.
>>
>>
>> 9. Release both PTT and monitor button on radio A.
>>
>>
>> 10. Replace protective cover on Universal Connectors.
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Coote, Jay" <jcoote at ci.arcadia.ca.us>
>> To: "Discussion of equipment manufactured by Motorola"
>> <motorola at mailman.qth.net>
>> Sent: Wednesday, May 05, 2010 5:28 PM
>> Subject: [Motorola] HT-1000 Cloning, RIB and cables
>>
>>
>>> List-
>>>
>>> A few HT-1000 questions, on behalf of a military unit:
>>>
>>> 1.    Can the HT-1000s be cloned, if so, what is the procedure and
>>> cloning cable?
>>> 2.    Are there schematics for building your own cloning and programming
>>> cables?
>>> 3.    Are there cheap, alternative sources for buying new  HT-1000
>>> programming and cloning cables?
>>>
>>> Thanks,
>>>
>>> Jay
>>>
>>>
>>> ______________________________________________________________
>>> Motorola mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/motorola
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Motorola at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>> ______________________________________________________________
>> Motorola mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/motorola
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Motorola at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Motorola at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>