[Motorola] HT1250 PROGRAMMING

[n6lrv at cox.net]

If memory serves, look on the radio configuration>basic screen for a HOT KEYPAD check box. This usually enables use of the DTMF keypad while transmitting.
Gary

---- K0DAN <k0dan at comcast.net> wrote: 
> I'm trying to wake up DTMF on an HT1250-LS+ and the radio is fighting me.
> 
> The CPS works fine with this radio for everything but the DTMF.
> 
> Am trying to set up the radio as a 16 channel (zone) conventional-only radio 
> on amateur freqs.
> 
> Here's pertinent info I can provide:
> 
> Radio model H25RDH9DP5
> 
> Conventional personalities: For all modes, tried Phone Syetem disabled, and 
> Phone Syetem=1, can't generate DTMF in either case
> 
> LS trunking: Nothing enabled
> 
> Phone list: Nothing in list
> 
> Phone system 1:
> Dial type: live
> Access/Deaccess codes: none
> PL required: no
> Override busy channel lockout: no
> Strip PL: no
> Access/Deacces type: imemdiate auto
> Deaccess Backporch delay: disabled
> 
> Tone configuration:
> Tone span: timed
> PTT sidetone: yes
> PTT short sidetone: no
> Mute access/deaccess: yes
> 
> Revert: no revert
> 
> I did the same programming on an HT1250-LS (not +) with no problems. Tried 
> to clone radios, clone wouldn't work cuz different models, so manually tried 
> to copy field-for-field yet the LS+ won't generate DTMF. Otherwise the radio 
> seems to be working fine.
> 
> Will someone please give me some guidance?
> 
> Thans & regards,
> 
> dt
> 
> 
> 
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:Motorola at mailman.qth.net