[Motorola] test cables and TEK-5

Wed, 7 Apr 2004 18:45:56 -0400

Jeff: I am almost positive you can use the old Motrac, Mocom cables on the
same test set. At one time, I had a  schematic of the TEK 5 test set. I'll
see if I can dig it up from the archives in the basement.
Harold Kinley (WA4GIB)
----- Original Message ----- 
From: "Jeffrey" <[email protected]>
To: <[email protected]>
Sent: Wednesday, April 07, 2004 6:13 PM
Subject: [Motorola] test cables and TEK-5


> This question is put to the Motorola guys that have been around for a long
> time. I have just acquired a Motorola TEK-5E test panel and don't have the
> book for it.  It came with Micor test cables that connect to the 20 pin
> rectangular adapter connector that plugs into the TEK-5 metering panel.
Can
> I use the cable I have from the older style (Motrac vintage) test meter
box
> that has the same 20 pin rectangular connector on the test meter end , and
> the small round 12 pin connector (like on Mocom and Mitrek) on the other
end
> , to test Motran , Mocom and Mitrek radios?  If you did not get that , let
> me say it this way.  Can the old Motrac 12 to 20 pin cable be used on my
> TEK-5 meter panel to test Motran, Mocom and Mitrek? Thanks , Jeff
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:[email protected]
>