[Motorola] Loose wires in Mitrek Consolette (L44JJB)

[Glenn Little WB4UIV]

This looks like it was a pl board. You might see if there is 12 VDC on one 
of the wires. Check the data for a communications specialists TS-32 board 
and see if the colors make sense for what you have. If this is what you 
have, you should be able to reconnect the RX audio path.

73
Glenn

At 04:28 PM 07/27/03 -0700, Bruce wrote:

>Hi Group,
>
>    Trying to get a Mitrek Super Consolette Base OTA,
>and looks like it may have had an option removed to
>which I'll have to either replace or bypass in order
>to restore operation.
>
>I've put a 640k High-Res JPeG 'Macro' image here:
>http://www.hfradio,.org/kb6lwn/images/Mot-L44JJB_01.jpg
>
>As you see, there is a group of various coloured wires
>coiled in front of the PS that connect to the PL switch
>on the front panel, pos and neg source behind the main
>connector on front of the Mitrek, and a couiple to what
>looks like the PL or DPL segment of the Mitrek chassis.
>
>I'm presuming that since this unit came from the Ohio
>State PD or HP, it MAY have been either a multiple PL
>or 'hopping' DPL, or some other kind of security funct.
>Perhaps even some sort of scrambler..  IDUNNO!  :-/
>
>I have TX carrier and audio, but nothing on RX no matter
>what the panel controls are set.
>
>I suppose I can eventually trace it down, but thought I'd
>check with gurus here first and call upon their experience.
>
>Bypassing this removed option would be the prefered action
>at this time, in order to restore CS ops.
>
>advTHANKSance
>
>_______________________________________________
>Motorola mailing list
>Motorola@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/motorola