[Motorola] HT1000 Programming cable

Tue, 6 Aug 2002 17:35:10 -0700

Well, I can't remember the exact terminology. I do know it worked fine. I
don't worry about WHY...don't usually have time for that. The fact that it
worked was good enough for me!
----- Original Message -----
From: "Alex Chadis" <[email protected]>
To: <[email protected]>
Sent: Tuesday, August 06, 2002 5:33 PM
Subject: Re: [Motorola] HT1000 Programming cable


> Never program in Reboot in DOS mode....
>
> Did your computer ever actually REBOOT? or did it quit out of windows 95?
> My guess is the later...  To do it correctly reboot it, and just before it
> says Windows 95 - hit f8 a few times - you might have to work on your
> timing.  Then select Safe mode command prompt.  This ensures that NOTHING
> left over from windows 95 is left in memory.  Things residing in memory
> can effect the serial port, and you will have problems....
>
> That is the safest way to ensure that doesn't happen.
>
> Good Luck...
>
> -Alex
>
> On Tue, 6 Aug 2002, Harold Kinley wrote:
>
> > Dwayne:
> > I used to get that message, too! I am running Windows95 on my laptop. I
was
> > trying to program from a DOS window. Then, I decided to boot up in the
DOS
> > mode and it worked fine! If you're running Win95 just go to the Start
menu
> > and click on shutdown. Then select "Reboot in DOS mode" and it should
work
> > OK!
> > Good luck!
> > Harold Kinley
> > ----- Original Message -----
> > From: "Dwayne Rich" <[email protected]>
> > To: <[email protected]>
> > Sent: Tuesday, August 06, 2002 4:29 PM
> > Subject: RE: [Motorola] HT1000 Programming cable
> >
> >
> > > Thanks I will try that.
> > >
> > > DWayne
> > > --- Robert Gruenfelder <[email protected]>
> > > wrote:
> > > > This problem is frequently caused by noise in one of
> > > > the lines between the
> > > > PC and the radio.  The noise commonly comes from
> > > > spinning hard drives or
> > > > power supplies in the PC itself.  Try moving the
> > > > radio as far away from the
> > > > PC as the cables will allow.  I've seen it MANY
> > > > times before.
> > > >
> > > > -Bob
> > > >
> > > > -----Original Message-----
> > > > From: [email protected]
> > > > [mailto:[email protected]]On Behalf Of
> > > > Dwayne Rich
> > > > Sent: Tuesday, August 06, 2002 1:44 PM
> > > > To: [email protected]
> > > > Subject: Re: [Motorola] HT1000 Programming cable
> > > >
> > > >
> > > > ok guys the reason I ask about the HT1000 cable is
> > > > that I am trying to read a HT1000 so I can get some
> > > > information about frequencies used for a certain
> > > > department that I work at. When I try and read it, I
> > > > get an error that says something to the effect of
> > > > radio communication area, check for TSR programs or
> > > > excessive noise and retry. This same computer/rib
> > > > programs my mTS2000. Any help would be greatly
> > > > appreciated.
> > > >
> > > > Dwayne
> > > >
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Yahoo! Health - Feel better, live better
> > > > http://health.yahoo.com
> > > > _______________________________________________
> > > > Motorola mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/motorola
> > > >
> > > > _______________________________________________
> > > > Motorola mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/motorola
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Health - Feel better, live better
> > > http://health.yahoo.com
> > > _______________________________________________
> > > Motorola mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/motorola
> > >
> >
> >
> > _______________________________________________
> > Motorola mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/motorola
> >
>
> _______________________________________________
> Motorola mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/motorola
>