[Milsurplus] PE-73C Dynamotor Commentary

[David Stinson]

You need some batteries.  Starting current for the 73 is about 80 amps :-D


On 3/3/2020 1:49 PM, Richard Brunner wrote:
> I just tested my PE-73C dynamotor with surprising and pleasing 
> results. It's rated 1 kv and 350 ma.  Well, I loaded it to 435 ma and 
> regulation was only 30 or 40 volts, hard to measure.  This is better 
> than any unregulated ac supply I've ever seen.  Load current was 25 
> Amps at 28 volts.
>
> I plan to use it with an RMCA ET-8019A marine transmitter which is 
> under restoration, having been "Hammified."  I thought the PE-73C a 
> bit small for this service, but it looks fine for CW.
>
> Richard, AA1P
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to arc5 at ix.netcom.com

-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus