[Milsurplus] Another unk connector

[WA5CAB at cs.com]

As the contacts are lettered and not numbered, it can't be a Cannon 
K-Series.  Assuming that it's a straight cable connector, that the AN 3057 cable 
clamp is installed (to make up that length), that the coupling threads are 
fine V-form, and that the contacts M and P are larger than the others, my guess 
would be that the nomenclature is AN 3106-28-2S.  If the back shell is 
one-piece screw-on with fine threads, the newer number would be MS 3106A-28-2S.  
And the Amphenol number would be 97-3106A-28-2S.  I have a couple of them 
but nothing in my database as to what they fit.  If you ever find your ATR-11 
manual, you can check its parts list for the mating chassis male, which 
might be AN 3102-28-2P.



In a message dated 10/30/2017 17:23:43 PM Central Daylight Time, 
Kargo_cult at msn.com writes: 
> I may have asked about this in the past, but found 2 more connectors. 
> Below is my representation of it.
> 
>  I wondered if this fits my ATR-11, but….cannot find the schematic right 
> now. Diameter of insert is 1-3/8 inch,
> 
>  34mm. The connectors have black cloth covered wire bundle, but only 8 
> wires; others are taped off or folded
> 
>  back. No number on connector shell. Female connector. This is a good 
> sized connector; from insert surface to
> 
>  exit end, 3-1/16 inch.
> 
>  thanks-
> 
>  Hue 
> 
>  
> 
>                 a------k
> 
>            b------l-----j
> 
>        c-----M-----P-----h
> 
>            d-----n----g
> 
>                e------f
> 
>                  24V
> 
> 
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20171030/3740f9f5/attachment-0001.html>