[Milsurplus] AN/ARC-2 question

[David Stinson]

A warning to the wise:
First-hand experience- if you attempt to replace 
the IF coupling caps as suggested, do NOT 
attempt to unsolder the original caps.  The coax
wire connected to these points has a center 
conductor insultation with a very low melt point.
Even a 25W iron will melt and short it.  
If they have any lead length, then cut the leads
at the cap body and "tack" the new cap to the leads.
If you don't have enough length, I can only 
advise caution.  I ended-up leaving mine alone.

73 Dave AB5S