[Milsurplus] BC-314-D Capacitors

[Paul Kraemer]

I have "un-canned" these type and replaced innards with new caps, then 
re-assemble
Takes a big soldering iron though
Paul K0UYA
----- Original Message ----- 
From: "Joe Connor" <joeconnor53 at yahoo.com>
To: <milsurplus at mailman.qth.net>
Sent: Thursday, October 06, 2011 10:32 AM
Subject: [Milsurplus] BC-314-D Capacitors


I'm fixing up a BC-314-D. What are the options for replacing the capacitors 
in the three containers on the rear of the RF deck. Each container contains 
three 0.1 caps. Some of these caps are leaky so I can't just leave them be.
>
>It looks like a tight squeeze to fit caps under the deck. I use the smaller 
>yellow caps and it looks to be a little too tight. Orange drops would be 
>impossible. Maybe radials? Another option would be simply to remove each of 
>the three containers and wire the caps in from the top but that wouldn't 
>look very good.
>
>Any suggestions?
>
>As always, thanks for the help.
>
>
> Joe Connor
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html