[Milsurplus] URM-25F meter?

[John Hutchins]

  Peter -
There is a article on the web about repairing meters such as this.  If 
you are lucky you could unwind one turn and re-solder,  that is if the 
open is at the tie point.
-Hutch

On 10/18/2010 8:17 PM, Peter Gottlieb wrote:
>    I picked up a decent condition URM-25F signal generator cheaply at a hamfest.
>
> Unfortunately, even though it produces output, the meter turns out to be open.
> Upon removing from the panel I can see that it had already been opened up,
> actually unsealed by unsoldering the face glass, then carefully reassembled so
> it would look untouched from the outside (without resoldering).  Careful further
> disassembly and measurement shows the coil itself to be open rather than a
> connection.
>
> This makes it essentially unrepairable.
>
> Would anyone have such a meter laying around?  It is a 100 uA FS, 2.35" flange
> OD meter with a uV top scale and a % mod bottom scale.  This one is a Burlington
> Instrument model 321.
>
>
> Peter
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>